膠囊式濾心(綜合) 首頁 > 產品介紹 > ADVANTEC > 膠囊式濾心
型  號:A02
中文名稱:膠囊式濾心(綜合)
英文名稱: Capsules – Introduction
廠  牌: ADVANTEC
     

商 品 說 明 資 料

用途:
*CCS    Polyether Sulfone
超純水及高純度藥品、化粧品除去粒子及除菌、組織培養液及培養基過濾。

*CCF    PTFE
酸鹼性溶液、有機溶劑、光阻劑、發酵用空氣及化工製程之氣體過濾。

*CCG    Glass Fiber
發酵用空氣之除去粒子及細菌、養殖實驗用水、過濾膜之前過濾及化工製程之氣體過濾。

*CCP    Polypropylene
純水及超純水、各種化學品、培養基液及化工製程之氣體過濾。

Capsules – Introduction
• All-polypropylene housing is sturdy and chemically compatible
• Three membrane-type media and two depth-type media
• Wide range of retentive pore sizes
• All types available in three different lengths
• Diameter is a standard 78 mm
• Selected media available pre-sterilized by ethylene oxide (EtO)

APPLICATIONS
• Filter tissue culture media, fermentation broth, and ground water
• Can be set in serial mode to maximize throughput volumes
• Point-of-use sterile filtration
• Use capsules for pilot/prototype studies, scale up to the same media in the cartridge format
• Cannot be used for gas filtration

SPECIFICATIONS

Model   Media Characteristic Media Type Pore Size or Nominal  Rating (μm) Membrane Layers Filtration Area per Capsule (cm2)
CCS PES Hydrophilic Membrane 0.20 – 0.45 Double Up to 1,800
CCF PTFE Hydrophobic Membrane 0.05 – 1.0 Single/Double Up to 3,600
CCFH PTFE Hydrophilic Membrane 0.20 Single Up to 3,600
CCP Polypropylene Hydrophobic Depth-type 0.8 – 30 N/A Up to 2,600
CCG Glass - Depth-type 0.45 – 1.0 N/A Up to 1,200

For detailed chemical compatibility information, see page 116.
When ordering length code “C”, end fixture code “D” is not available.